Cisco WS-C3560E-24PD-E Command Reference Manual page 180

ip dhcp snooping information option allow-untrusted
Examples
This example shows how to configure an access switch to not check the option-82 information in
untrusted packets from an edge switch and to accept the packets:
Switch(config)# ip dhcp snooping information option allow-untrusted
You can verify your settings by entering the show ip dhcp snooping privileged EXEC command.
Related Commands Command
show ip dhcp snooping
show ip dhcp snooping binding
Catalyst 3560 Switch Command Reference
2-148
Chapter 2
Description
Displays the DHCP snooping configuration.
Displays the DHCP snooping binding information.
Catalyst 3560 Switch Cisco IOS Commands
78-16405-05