Show Mls Qos - Cisco WS-C3560E-24PD-E Command Reference Manual

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands

show mls qos

Use the show mls qos user EXEC command to display global quality of service (QoS) configuration
information.
Syntax Description | begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.1(19)EA1
Usage Guidelines
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples
This is an example of output from the show mls qos command when QoS is enabled and Differentiated
Services Code Point (DSCP) transparency is disabled:
Switch> show mls qos
QoS is enabled
QoS ip packet dscp rewrite is disabled
This is an example of output from the show mls qos command when QoS is enabled and DSCP
transparency is enabled:
Switch> show mls qos
QoS is enabled
QoS ip packet dscp rewrite is enabled
Related Commands Command
mls qos
78-16405-05
show mls qos [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Description
Enables QoS for the entire switch.
Catalyst 3560 Switch Command Reference
show mls qos
2-479