Debug Monitor - Cisco WS-C3560E-24PD-E Command Reference Manual

debug monitor

debug monitor
Use the debug monitor privileged EXEC command to enable debugging of the Switched Port Analyzer
(SPAN) feature. Use the no form of this command to disable debugging.
Syntax Description
all
errors
idb-update
info
list
notifications
platform
requests
snmp
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.1(19)EA1
Usage Guidelines The undebug monitor command is the same as the no debug monitor command.
Catalyst 3560 Switch Command Reference
B-24
debug monitor {all | errors | idb-update | info | list | notifications | platform | requests | snmp}
no debug monitor {all | errors | idb-update | info | list | notifications | platform | requests | snmp}
Display all SPAN debug messages.
Display detailed SPAN error debug messages.
Display SPAN interface description block (IDB) update-trace debug messages.
Display SPAN informational-tracing debug messages.
Display SPAN port and VLAN-list tracing debug messages.
Display SPAN notification debug messages.
Display SPAN platform-tracing debug messages.
Display SPAN request debug messages.
Display SPAN and Simple Network Management Protocol (SNMP) tracing
debug messages.
Modification
This command was introduced.
Appendix B Catalyst 3560 Switch Debug Commands
78-16405-05