Debug Ip Verify Source Packet - Cisco WS-C3560E-24PD-E Command Reference Manual

debug ip verify source packet

debug ip verify source packet
Use the debug ip verify source packet privileged EXEC command to enable debugging of IP source
guard. Use the no form of this command to disable debugging.
Syntax Description
This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(20)SE
Usage Guidelines
The undebug ip verify source packet command is the same as the no debug ip verify source packet
command.
Related Commands Command
show debugging
Catalyst 3560 Switch Command Reference
B-14
debug ip verify source packet
no debug ip verify source packet
Modification
This command was introduced.
Appendix B
Description
Displays information about the types of debugging that are
enabled. For syntax information, select Cisco IOS Release 12.2
Configuration Guides and Command References > Cisco IOS
Configuration Fundamentals Configuration Guide, Release
12.2 > System Management > Troubleshooting and Fault
Management.
Catalyst 3560 Switch Debug Commands
78-16405-05