Vmps Retry - Cisco WS-C3560E-24PD-E Command Reference Manual

Chapter 2 Catalyst 3560 Switch Cisco IOS Commands

vmps retry

Use the vmps retry global configuration command to configure the per-server retry count for the VLAN
Query Protocol (VQP) client. Use the no form of this command to return to the default setting.
Syntax Description
count
Defaults The default retry count is 3.
Command Modes Global configuration
Command History Release
12.1(19)EA1
Examples
This example shows how to set the retry count to 7:
Switch(config)# vmps retry 7
You can verify your setting by entering the show vmps privileged EXEC command and examining
information in the Server Retry Count row.
Related Commands Command
show vmps
78-16405-05
vmps retry count
no vmps retry
Number of attempts to contact the VLAN Membership Policy Server (VMPS) by the
client before querying the next server in the list. The range is 1 to 10.
Modification
This command was introduced.
Description
Displays VQP and VMPS information.
Catalyst 3560 Switch Command Reference
vmps retry
2-691