Alpine 3800 Series Architecture; Alpine 3808 Switch Front View - Extreme Networks Summit Summit1i Hardware Installation Manual

7
Alpine 3800 Series Switch Chassis
There are three models in the Alpine 3800 series: the Alpine 3808 switch, the Alpine 3804 switch, and
the Alpine 3802 switch.
This chapter describes:
• Alpine 3800 Series Architecture on page 109
• Installing the Chassis on page 118
— Rack Installation on page 119
— Grounding the Alpine 3800 Series Chassis on page 121
• Removing the Chassis on page 122
NOTE
Read the information in this chapter thoroughly before you attempt to install or remove any Alpine
chassis.

Alpine 3800 Series Architecture

This section describes and shows the architecture of the Alpine 3800 series chassis. For each chassis, the:
• Front view shows an example of a completely installed chassis with optional I/O modules that you
can install in the chassis
• Rear view shows the back of the chassis

Alpine 3808 Switch Front View

The Alpine 3808 switch consists of the following components:
• One 9-slot chassis with backplane
• Eight I/O module slots, labeled 1 through 8
• One SMMi slot
• One or two power supplies (accessed from the front of the unit)
• One fan tray (accessed from the front of the unit)
Extreme Networks Consolidated "i" Series Hardware Installation Guide 109