Chapter 5: Installing The Vsp 4450Gsx-Pwr+ Series; Installation Checklist; Installation Fundamentals - Extreme Networks ExtremeSwitching Virtual Services Platform 4450GSX-PWR+ Installation Manual

Chapter 5: Installing the VSP 4450GSX-

Installation checklist

Use this checklist to install the VSP 4450GSX-PWR+and VSP 4450GSX-DC.
No. Task
1. Install the VSP 4450GSX series.
2. Install the primary or redundant
power supply.
Important:
A combination of AC-input and
DC-input power supplies in the
same chassis is not supported.
3. Check the LEDs to verify the
installation.

Installation fundamentals

The following section describes the installation fundamentals for the VSP 4450GSX series models.
Warning:
Do not use the ERS to VSP conversion kit with this chassis. The kit is incompatible with the
VSP 4450GSX.
VSP 4450GSX-PWR+ model
The VSP 4450GSX-PWR+ model consists of:
August 2018
PWR+ series
Installing the Virtual Services Platform 4450GSX-PWR+
Description
You can install the switch in two ways:
• Installing the Virtual Services Platform 4000
on a table or shelf on page 22
• Installing the Virtual Services Platform 4000
in an equipment rack
For the procedure to install power supply, see
Installing the VSP 4000 Series PWR power
supply on page 28.
For a description of the LEDs, see
Emitting Diode (LED) on VSP 4000
page 35.
on page 23
Check Light
on
16