Extreme Networks Summit Summit1i Hardware Installation Manual page 277

3 For the BlackDiamond 6816 switch or the BlackDiamond 6804 switch, use the handle on the front of
the fan tray to pull it straight out of the chassis approximately ½ inch (12.7 mm), as shown in
Figure 140. This action disconnects the power to the fan tray.
For the BlackDiamond 6808 switch, grasp the edges of the two handles on the front of the fan tray to
pull it straight out of the chassis approximately ½ inch (12.7 mm), as shown in Figure 141. This
action disconnects power to the fan tray.
Figure 140: An example of removing the BlackDiamond 6816 or the BlackDiamond 6804 fan tray
Extreme Networks Consolidated "i" Series Hardware Installation Guide
Removing a BlackDiamond 6800 Series Fan Tray
BD_030
277