Extreme Networks Summit Summit1i Hardware Installation Manual page 115

NOTE
Slot 3 in the Alpine 3802 accepts only Alpine Access I/O modules (silver stripe). You cannot insert an
Alpine Ethernet I/O module (green stripe) into slot 3.
For more information about this command, see the ExtremeWare Command Reference Guide and the
ExtremeWare Software User Guide.
Alpine 3802 Switch LEDs
Table 34 describes the LED activity of the Alpine 3802 switch.
Table 34: Alpine 3802 switch LEDs
LED
DIAG
STATUS
PSU A, PSU B
EXTENDED MODE
STANDARD MODE
NOTE
The Alpine 3802 switch has an integrated Switch Management Module that is located in the chassis.The
module is not hot-swappable or user-removable. Do not attempt to remove. Contact Extreme Networks
Customer Support if you experience problems.
Extreme Networks Consolidated "i" Series Hardware Installation Guide
Color Indicates
Green blinking Power-on Self Test (POST) is running
Off Normal operation
Green blinking Normal operation
Yellow blinking Critical error, fan failure, or over temperature
Off Unit is not receiving power
Green Normal operation
Amber PSU failure
Off PSU not present or not powered
Green Extended mode operation
Off Not operating in extended mode
Green Standard mode operation
Off Not operating in standard mode
Alpine 3800 Series Architecture
115