Extreme Networks Summit Summit1i Hardware Installation Manual page 149

a Grasp the module front panel with one hand, and place your other hand under the metal panel to
support the module.
CAUTION
To prevent ESD damage, handle the module by the metal panel edges only. Never touch the
components on the PCB or pins on any of the connectors.
b Slide the module out of the chassis and place it immediately into an antistatic sack to protect it
from ESD damage and to prevent dust from collecting on the module's connectors.
4 To install a replacement SMMi, follow the installation procedure described on page 147.
5 Leave the ESD strap permanently connected to the chassis so that it is always available when you
need to handle ESD-sensitive components.
Extreme Networks Consolidated "i" Series Hardware Installation Guide
Removing SMMi Modules
149