Configuring The Control Plane Service Policy - Cisco Nexus 3600 NX-OS Security Configuration Manual

Configuring Control Plane Policing
Step 9
Step 10
Related Topics
Configuring a Control Plane Class Map, on page 127

Configuring the Control Plane Service Policy

You can configure one or more policy maps for the CoPP service policy.
When you try to change the CoPP policy and apply a custom CoPP policy, it is configured in the hardware
Note
as non-atomic, and the following system message appears:
This operation can cause disruption of control traffic. Proceed (y/n)?
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT24-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT23-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT21-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT25-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT26-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT22-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
2013 Nov 13 23:16:46 switch %ACLQOS-SLOT4-5-ACLQOS_NON_ATOMIC: Non atomic ACL/QoS policy
update done for CoPP
Before You Begin
Ensure that you have configured a control plane policy map.
Command or Action
show policy-map type control-plane
[expand] [name class-map-name]
Example:
switch(config)# show policy-map type
control-plane
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Configuring the Control Plane Service Policy
Purpose
(Optional)
Displays the control plane policy map configuration.
(Optional)
Copies the running configuration to the startup
configuration.
Cisco Nexus 3600 NX-OS Security Configuration Guide, Release 7.x
[no] y
131