First Time Connecting To The Switch; Figure 6-1. Initial Screen, First Time Connecting To The Switch - TRENDnet TEG-S224M User Manual

changes. An asterisk "*" indicates a change has been made but won't
take effect until the Switch has been rebooted.

First Time Connecting To The Switch

The Switch supports user-based security that can allow you to
prevent unauthorized users from accessing the Switch or changing
its settings. This section tells how to log onto the Switch.
Note: The passwords used to access the Switch are case sensitive;
therefore, "S" is not the same as "s."
When you first connect to the Switch, you will be presented with
the first login screen (shown below). Press Ctrl+R (hold down the
Ctrl key, press the R key, and release both keys) to call up the
screen, if the initial login screen does not appear. Also Ctrl+R can
be used at any time to refresh the screen.

Figure 6-1. Initial Screen, first time connecting to the Switch

Note: There is no initial username or password. Leave the username
and password fields blank.
Using the Console Interface
Stackable NWay Ethernet Switch User's Guide
53