Measures To Correct Paper-Size Indicating Position Of Document Size Label (Dadf-Aq1) - Canon imageRUNNER ADVANCE C3330 Series Troubleshooting Manual

Copier Color | iR-ADV C3330/C3325/C3320 Series |
Measures to correct paper-size indicating position of document
size label (DADF-AQ1)
[Symptom]
In the machines prior to the Countermeasure cut-in serial number in factory described below paper-size indicating position of the
document size label and slide guide may not match.
[Cause]
Approximate 1.5mm gap [a] generated in the paper-size indicating position between the document size label [1] and the slide
guide [2] causes the above symptom.
[Service work]
In case the above symptom occurs, replace the document size label [1] with a new-type document size label.
Remove the old document size label and affix the new one.
[Caution] Affix the document size label, aligning the label with the front side of the rib [a].
[Service part]
No.
Old
1
New
Old
2
New
Old
3
New
[Countermeasure cut-in serial numbers in factory]
Model
iR-ADV C3330i US 120V
iR-ADV C3325i US 120V
iR-ADV C3330i LTN 230V
Part number
FE3-0467-000
FE8-2837-000
FE3-0468-000
FE8-2838-000
FE3-0469-000
FE8-2839-000
60
Description
LABEL, DOCUMENT SIZE
LABEL, DOCUMENT SIZE
LABEL, DOCUMENT SIZE
LABEL, DOCUMENT SIZE
LABEL, DOCUMENT SIZE
LABEL, DOCUMENT SIZE
Serial number
QTV04123
QTW06766
RJQ00700