Unseating The Module - Cabletron Systems DIGITAL VNswitch 900CG Installation And Configuration Manual

Unseating the Module

To unseat the module from the DIGITAL MultiSwitch 900 chassis (Figure 6-3),
complete the following steps:
Step
1
2
3
Figure 6-3: Unseating the Module
1
Action
Lift the release lever (1) at the top of the DIGITAL MultiSwitch 900
slot.
While holding up the release lever (2), pivot the module back on its
bottom mounting tab.
Lift the module (3) from the backplane.
3
Unseating the Module
2
NPB-0008-95F
Removing the Module 6-3