Using Menus To Configure The Module - Cabletron Systems DIGITAL VNswitch 900CG Installation And Configuration Manual

Table of Contents

Advertisement

Using Menus to Configure the Module

The following screen shows the options available from the VNswitch 900CG
INSTALLATION MENU when the module is operating in a MultiSwitch 900
configuration. Depending on the configuration state of the module, some options may
not appear.
Note that when your module is installed in the MultiSwitch 900, the slot number where
the module is installed appears at the top of the menu.
VNswitch 900CG
===========================================================
[Ctrl/C] Return to Chassis Manager Installation Menu
===========================================================
- slot 3
VNswitch 900CG INSTALLATION MENU
[1]
Restart with Factory Defaults
[2]
Restart with Current Settings
[3]
Show Current Settings
[4]
Configure IP
[5]
Go to Local Console
[6]
Product-Specific Options...
Enter selection:
n
<Return>
Configuring the Module in a DIGITAL MultiSwitch 900 5-5

Using Menus to Configure the Module

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DIGITAL VNswitch 900CG and is the answer not in the manual?

Table of Contents