Cabletron Systems DIGITAL VNswitch 900CG Installation And Configuration Manual page 24

Module Components
Table 2-1: Front Panel LEDs and Connectors (continued)
Item
9
10
11
12
13
14
2-4 Installing the DIGITAL VNswitch 900CG
Icon Name
Address
Label
Port Status
LEDs
Port Activity
LEDs
8-pin MMJ
100BaseTX
port
connectors
Gigabit Ethernet LEDs and Connectors (Items 12-14)
Port Status
LED
Port Activity
LED
FRU LED
Gigabit
Ethernet port
for MMI
connectors
Description
Contains the lowest of 256 consecutive
Media Access Control (MAC) addresses.
Show the status of the ports. Each
indicates if the associated port is enabled
or disabled and receiving a valid link.
Show the activity of the ports. Each
indicates network traffic level on the
associated port.
Fast Ethernet port connectors support
UTP cabling. These ports are wired as
crossover connectors.
Indicates if the port is enabled or disabled
and receiving a valid link.
Indicates network traffic level.
Indicates the GBIC is a Field
Replaceable Unit (FRU).
Support for Gigabit Ethernet Multi-
Mode Fiber (MMF) and Gigabit Ethernet
Single-Mode Fiber (SMF). These ports
are wired as crossover connectors.