Restart With Factory Defaults - Cabletron Systems DIGITAL VNswitch 900CG Installation And Configuration Manual

[1] Restart with Factory Defaults

[1] Restart with Factory Defaults

This option reboots the module, causing its configured Nonvolatile Random Access
Memory (NVRAM) parameters to be initialized to factory default values followed by
a module reset. Allow approximately three minutes for the module to reboot and
complete self-test. To reset the module without losing the settings, use option [2]
Restart with Current Settings.
This action deletes all configured settings and replaces them with factory default
values. All configuration settings will be lost.
The following example shows the dialog associated with this option:
VNswitch 900CG - slot 3
==========================================================
* * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
==========================================================
5-6 Configuring the Module in a DIGITAL MultiSwitch 900
RESTART WITH FACTORY DEFAULTS
IMPORTANT! IMPORTANT!
This selection will delete the current configuration
settings and reset the system with the factory default
settings. All configuration settings will be lost.
Press Y to confirm [N]:
Press Return for Main Menu...
CAUTION
IMPORTANT!
<Return>
* * * *