Using Menus To Configure The Module - Cabletron Systems DIGITAL VNswitch 900CG Installation And Configuration Manual

Using Menus to Configure the Module

This section describes the options that are available from the VNswitch 900CG
INSTALLATION MENU when the module is installed in the DEChub ONE docking
station. Depending on the configuration state of the module, some options may not
appear.
To modify the configuration, select [5] Go To Local Console.
The following example shows the dialog associated with this option.
VNswitch 900CG
===========================================================
===========================================================

Using Menus to Configure the Module

VNswitch 900CG INSTALLATION MENU
[1] Restart with Factory Defaults
[2] Restart with Current Settings
[3] Show Current Settings
[4] Configure IP
[5] Go to Local Console
[6] Product-Specific Options...
Enter selection: 5 <Return>
Configuring the Module in a DEChub ONE 4-3