Safety Devices; Safety And Information Signs - Angelo Po 0S1PE4C User Manual

SAFETY
Even though the appliance is complete with all
safety devices, during the installation and con-
nection procedures it may be necessary to sup-
plement it with additional devices to comply
with the relevant applicable laws.
Automatic reset thermostat: each plate is
A)
equipped with this device, which halves its
power output in case of overheating. Once
the problem has been resolved and the tem-
perature has returned to normal, operation is
automatically restored.
The position of the signs provided is shown in
the picture.
Manufacturer and appliance nameplate.
A)
WARNING: read the manual carefully
B)
before carrying out any procedure.
WARNING: when washing the appli-
C)
ance, do not point pressurised water and/or
steam jets at internal parts"
WARNING draws attention on com-
D)
pliance with the rules. "Install in compliance
with the applicable regulations and use in
well ventilated premises only".
WARNING draws the attention on
E)
compliance with the rules. "The Manufac-
turer declines all liability in case of failure to
comply with the installation and commis-
sioning instructions".
WARNING: watch out for hot sur-
F)
faces.
3395230_ut_GB_rev.1

SAFETY DEVICES

SAFETY AND INFORMATION SIGNS

WARNING:There are no indicator de-
vices to signal the tripping of the automatic
reset thermostat.
E
D
F
37M3202
C B
CE Marking: it indicates that the equipment
G)
is compliant with all relevant laws applicable
to the product.
WEEE symbol: it indicates that the appliance
H)
is subject to specifi c waste disposal regula-
tions.
ENGLISH
G
A
H
3