Troubleshooting the AP-3
Factory Default Procedure
reconfigure the unit.
The AP Supports a Command Line Interface (CLI).
●
If you are having trouble locating your AP on the network, connect to the unit directly using
the serial interface and see
syntax and parameter names.
Symptoms and Solutions
Connectivity Issues
Connectivity issues include any problem that prevents you from powering up or connecting to
the AP:
AP Unit Will Not Boot - No LED Activity
●
Serial Link Does Not Work
●
Ethernet Link Does Not Work
●
AP Unit Will Not Boot - No LED Activity
If the AP will not boot:
1. Make sure your power source is operating.
2. Make sure all cables are connected to the AP correctly.
3. If you are using Active Ethernet, make sure you are using a Category 5, foiled, twisted pair
cable to power the AP.
194 Wireless AP-3 User's Guide
on page 202 to set the unit to factory default values and
Appendix A: The Command Line Interface
for CLI command