Ip Address Pool Parameters; Syntax Examples - Avaya AP-3 User Manual

The Command Line Interface

IP Address Pool Parameters

Table 53: IP Address Pool Parameters
Name
DHCP Server IP Address
Pool Table
Table Index
Start IP Address
End IP Address
Width
Default Lease Time
(optional)
Maximum Lease Time
(optional)
Comment (optional)
Status (optional)
Note:
Set either End IP Address or Width (but not both) when creating an IP address
Note:
pool.

Syntax Examples

[Device-Name]> set dhcpstatus disable
[Device-Name]> set dhcpippooltbl 0 startipaddr <start ip address> endipaddr <end ip
address>
[Device-Name]> set dhcpgw <gateway ip address>
[Device-Name]> set dhcppridnsipaddr <primary dns ip address>
[Device-Name]> set dhcpsecdnsipaddr <secondary dns ip address>
[Device-Name]> set dhcpstatus enable
238 Wireless AP-3 User's Guide
Type Values
Table N/A
Integer User Defined
IpAddress User Defined
IpAddress User Defined
Integer User Defined
Integer32 3600–86400 sec
(default)
Integer32 3600–86400 sec
(default)
DisplayString User Defined
Integer enable (1)
disable (2)
delete (3)
Access CLI Parameter
R dhcpippooltbl
N/A index
RW startipaddr
RW endipaddr
RW width
RW defleasetm
RW maxleasetm
RW cmt
RW status