[Device-Name]> show iparp?
Result of "show iparp?" CLI command
Example 4. Displaying prompts for successive parameters
Enter the command, a space, and then ?. Then, when the parameter prompt appears, enter the
parameter value. Result: The parameter is changed and a new CLI line is echoed with the new
value (in the first part of the following example, the value is the IP Address of the TFTP server).
After entering one parameter, you may add another ? to the new CLI line to see the next
parameter prompt, and so on until you have entered all of the required parameters. The
following example shows how this is used for the download Command. The last part of the
example shows the completed download command ready for execution.
[Device-Name]> download ?
<TFTP IP Address>
[Device-Name]> download 192.168.0.101 ?
<File Name>
[Device-Name]> download 192.168.0.101 apimage ?
<file type (config/img/bootloader)>
[Device-Name]> download 192.168.0.101 apimage img <CR>
The Help Command
The help command displays instructions on using control-key sequences for navigating a
command line and displays command information and examples.
Using help as the only argument:
●
[Device-Name]> help
CLI Help
Issue 1 October 2004
223