The Command Line Interface
Note:
For larger networks that include multiple Access Points, you may prefer to
Note:
maintain this list on a centralized location using the RADIUS parameters (see
RADIUS Commands
Monitoring Parameters
Using the show command with the following parameters will display operating statistics for the
AP (these are the same statistics that are described in
HTTP Web interface).
staticmp: Displays the ICMP Statistics.
●
statarptbl: Displays the IP ARP Table Statistics.
●
statbridgetbl: Displays the Learn Table.
●
statiapp: Displays the IAPP Statistics.
●
statradius: Displays the RADIUS Authentication Statistics.
●
statif: Displays information and statistics about the Ethernet and wireless interfaces.
●
stat802.11: Displays additional statistics for the wireless interfaces.
●
statethernet: Displays additional statistics for the Ethernet interface.
●
statmss: Displays station statistics and Wireless Distribution System links.
●
258 Wireless AP-3 User's Guide
on page 261).
Chapter 5: Monitoring the AP-3
for the