Performing Advanced Configuration
Alarm Host Table
Adding an Entry or Enabling the AP to Send Traps
To add an entry and enable the AP to send SNMP trap messages to a Trap Host, click Add, and
then specify the IP Address and Password for the Trap Host.
Note:
Up to 10 entries are possible in the Alarm Host table.
Note:
IP Address: Enter the Trap Host IP Address.
●
Password: Enter the password in the Password field and the Confirm field.
●
Comment: Enter an optional comment, such as the alarm (trap) host station name.
●
Editing or Deleting an Entry
To edit or delete an entry, click Edit. Edit the information, or select Enable, Disable, or Delete
from the Status drop-down menu.
Syslog
The Syslog messaging system enables the AP to transmit event messages to a central server
for monitoring and troubleshooting. The AP can send messages to multiple Syslog servers. The
access point logs "Session Start (Log-in)" and "Session Stop (Log-out)" events for each wireless
client as an alternative to RADIUS accounting.
See RFC 3164 at
124 Wireless AP-3 User's Guide
http://www.rfc-editor.org
for more information on the Syslog standard.