The Command Line Interface
Show Individual and Table Parameters
To view a single parameter:
[Device-Name]> show <parameter name>
Syntax:
[Device-Name]> show ipaddr
Example:
Displays the Access Point IP address.
Result:
Figure 85: Result of "show ipaddr" CLI Command
To view all parameters in a table:
Syntax:
Example:
Result:
upload
Uploads a text-based configuration file from the AP to the TFTP Server. Executing upload with
the asterisk character (*) will make use of the previously set/stored TFTP parameters.
Executing upload without parameters will display command help and usage information.
234 Wireless AP-3 User's Guide
[Device-Name]> show <table name>
[Device-Name]> show mgmtipaccesstbl
Displays the IP Access Table and its entries.