Cli Commands; Done - Avaya AP-3 User Manual

The Command Line Interface
4. Enter the CLI password (default is public).
Note:
Avaya recommends changing all default passwords immediately. See the
Note:
following sections for information on how to change the default passwords:
CLI password, see
●
SNMP passwords (read, read-write, and SNMPv3 authentication and privacy), see
●
SNMP Commands
HTTP password, see
●

CLI Commands

done: Terminates the CLI session
●
download: Uses a TFTP server to download image files, configuration files, bootloader
●
upgrade files, SSL certificates, SSL private keys, SSH public keys, SSH private keys, or
CLI Batch Files to the Access Point.
exit: Terminates the CLI session
●
help: Displays general CLI help information or command help information, such as
●
command usage and syntax
history: Remembers commands to help avoid re-entering complex statements
●
passwd: Sets the Access Point's CLI password
●
quit: Terminates the CLI session
●
reboot: Reboots the Access Point in the specified time
●
search: Lists the parameters in a specified Table
●
set: Configures the value of the specified parameter.
●
show: Displays the value of the specified parameter, or displays all parameter values of a
●
specified group (parameter table).
upload: Uses TFTP server to upload configuration files from Access Point to TFTP default
●
directory or specified path

done

Ends a CLI session.
[Device-Name]> done
226 Wireless AP-3 User's Guide
passwd on page 229.
on page 271.
HTTP and HTTPS Commands on page 248.