Syslog Commands; Syslog Parameters - Avaya AP-3 User Manual

The Command Line Interface

Syslog Commands

Syslog Parameters

The following parameters configure the Syslog settings.
Table 96: Syslog Parameters
Name
Syslog
Syslog Status
Syslog Port
Syslog Lowest
Priority Logged
Heartbeat Status
Heartbeat Interval
(seconds)
Note:
The Heartbeat parameters are advanced settings not available via the HTTP
Note:
interface. When Heartbeat is enabled, the AP periodically sends a message to
the Syslog server to indicate that it is active. The frequency with which the
heartbeat message is sent depends upon the setting of the Heartbeat Interval.
278 Wireless AP-3 User's Guide
Type Values
Group N/A
Integer enable
disable (default)
Octet String 514
Integer 1 – 7
1 = LOG_ALERT
2 = LOG_CRIT
3 = LOG_ERR
4 = LOG_WARNING
5 = LOG_NOTICE
6 = LOG_INFO (default)
7 = LOG_DEBUG
Integer enable (1)
disable (2) (default)
Integer 1 – 604800 seconds
900 sec. (default)
Access CLI Parameter
R syslog
RW syslogstatus
R syslogport
RW syslogpritolog
RW sysloghbstatus
RW sysloghbinterval