Setting Syslog Event Notifications; Configuring Syslog Event Notifications - Avaya AP-3 User Manual

Setting Syslog Event Notifications

Syslog Events are logged according to the level of detail specified by the administrator. Logging
only urgent system messages will create a far smaller, more easily read log then a log of every
event the system encounters. Determine which events to log by selecting a priority defined by
the scale shown in
Table 36: Syslog Priority Scale
Event
LOG_EMERG
LOG_ALERT
LOG_CRIT
LOG_ERR
LOG_WARNING
LOG_NOTICE
LOG_INFO
LOG_DEBUG

Configuring Syslog Event Notifications

You can configure the following Syslog settings from the HTTP interface:
Table 37: Syslog Parameters 1 of 2
Parameter
Enable Syslog
Syslog Port
Number
Syslog Lowest
Priority Logged
Table 36.
Priority
0
1
2
3
4
5
6
7
Description
Place a check mark in the box provided to enable system logging.
This field is read-only and displays the port number (514) assigned for
system logging.
The AP will send event messages to the Syslog server that correspond to
the selected priority and above. For example, if set to 6, the AP will
transmit event messages labeled priority 0 to 6 to the Syslog server(s).
This parameter supports a range between 1 and 7; 6 is the default.
Description
system is unusable
action must be taken immediately
critical conditions
error conditions
warning conditions
normal but significant condition
informational
debug-level messages
Alarm Configuration
1 of 2
Issue 1 October 2004 125