Backup Your Ap Configuration File To A Tftp Server; Wds Commands; Wireless Distribution System (Wds) Parameters - Avaya AP-3 User Manual

Backup your AP Configuration File to a TFTP Server

First start your TFTP program. It must be running and configured to transmit and receive.
[Device-Name]> upload <TFTP Server IP address> <tftpfilename (such as "config.sys")>
config
[Device-Name]> show tftp (to ensure the filename, file type, and the IP address are correct)
After setting the TFTP parameters, you can back up your current file (as long as all the other
parameters are the same), with the following command:
[Device-Name]> upload *

WDS Commands

Wireless Distribution System (WDS) Parameters

Table 102: WDS Parameters
Name
WDS Table
Port Index
Status
Partner MAC Address
Type Values
Table N/A
Integer 3.1 - 3.6 (Wireless)
Integer enable, disable
PhysAddress User Defined
WDS Commands
Access CLI Parameter
R wdstbl
R portindex
RW status
RW partnermacaddr
Issue 1 October 2004 285