Video Panel - American Dynamics EDVR Installation And Operation Manual

EDVR Installation and Operation Guide

Video Panel

When you start the EDVR Client, the default view displays the Video Panel. This is the first of the three major
"views" available in the main window of the EDVR Client.
Refer to the preceding figure to locate the following major screen and control areas by label number.
1. Available Devices/PTZ Controls
These two tabs refer to the same pane of the main window.
All EDVRs that are connected to the network are listed by IP address (see label 1 in the following figure).
When you double-click any EDVR (the IP address/name) in label 1, you will see the following screen. Enter
the correct username and password to log on to the selected EDVR. The default username and password
are admin and 9999, respectively.
At this point, you can click the PTZ Control button to access the PTZ Control mode.
2. Working Device
After you select the IP address of an EDVR, that EDVR and all of its cameras will be displayed in the upper
right section (label 2 in previous figure).
3. Multi-Screen
All the videos of the cameras will be displayed (label 3 in previous figure). Use the function buttons (label 5)
or click directly on a camera (channel) video to change the display.
4. EDVR Client View Tabs
Select the appropriate tab to change the view of the EDVR Client main window (in the area labeled 3, "Multi-
Screen"): Video Panel, Settings, and Web Viewer.
5. Function Buttons
Click a button to execute its function.
Note
When you place the mouse pointer over a button, text appears that describes that button.
82 EDVR