Rear Panel - American Dynamics EDVR Installation And Operation Manual

American dynamics edvr: operation guide
Hide thumbs Also See for EDVR:
Table of Contents

Advertisement

Rear Panel

Note
For items 29, 30, 31, and 42. As are appropriate for your version of EDVR (that is, 4CH, 9CH, or 16CH), you
will have 4, 9, or 16 Video in connectors, Video loop through connectors, termination switches, and Alarm I/O
connections.
29. & 30. 75Ù/Hi-Z individual termination
These switches (4, 9, or 16, depending upon EDVR version) are used to set the impedance of each loop
through output connector (31) between the values 75Ù and Hi-Z.
Toggle the corresponding impedance termination to the Hi-Z position if another device is connected to the
video loop through that connector. Set the impedance to the 75Ù position if no other device is connected to
the corresponding loop through the connector. The default setting is 75Ù.
31. Video in connectors (Ch1–Ch16) & Video loop through connectors (Ch1–Ch16)
Video in: These BNC connectors (4, 9, or 16, depending upon EDVR version) are used to connect to the
video output from the cameras.
Video loop through: These BNC connectors (4, 9, or 16, depending upon EDVR version) are used to loop
video signals from each camera's video out connector to other devices.
32. Call monitor connector
This BNC connector provides video signals to the call monitor to display any selected camera in full-screen
call up, sequential display, and alarm call up operations.
33. Main monitor connector
This BNC connector provides a video signal to the main monitor that is controlled by the front panel control
buttons. This connector transmits the video display in full-screen format, multi-screen format, and sequential
format.
34. Ethernet 10/100 connector
A standard RJ-45 connector for 10/100 Mbps Ethernet networks.
35. Ground Screw
The ground screw is for the chassis terminal.
36. & 37. Left and Right Audio In connectors
These two connectors are used to connect the audio output from a camera or another device to the EDVR.
38. & 39. Left and Right Audio Out connectors
These two connectors provide the unit's audio signal to a speaker or stereo.
Product Description
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents