American Dynamics EDVR Installation And Operation Manual page 69

Schedule
Enter the Schedule Settings menu to configure up to 8 schedules. A schedule can change the recording settings
as well as the alarm settings at designated times. Users can set alarm, record, and motion preferences to
override normal alarm, record, and motion settings during a scheduled record period. Use the shuttle ring to
choose Enable or Disable for each schedule.
Note
If there are any conflicts between the schedules, a schedule with a smaller (lower) number has priority over a
schedule with a higher (larger) number. For example, if there is a conflict between schedules 1 and 2, the
EDVR will use the values in schedule 1.
Advanced Settings
1 Alarm Settings
2 Record Settings
3 Motion Settings
4 Camera Covert
5 Operation Locks
6 Communication
7 Disk Setup
8 Schedule
9 Dome Settings
Return
menu: exit
enter: select
/: item
Enter the Schedule Settings page to adjust the following items:
Schedule Settings
1 Schedule1 Enable Enter
2 Schedule2 Disable Enter
3 Schedule3 Disable Enter
4 Schedule4 Disable Enter
5 Schedule5 Disable Enter
6 Schedule6 Disable Enter
7 Schedule7 Disable Enter
8 Schedule8 Disable Enter
Return
menu: exit
enter: select
shuttle: value
/: item
On the "Schedule Settings" page you have eight schedules, each of which has an identical "Settings" process.
You must first activate this by turning "Disable" to "Enable", then choose the corresponding "Enter" and press the
ENTER button on the front panel to enter your selected schedule's "Settings" page. The settings page has the
same format as all the other schedules, as follows:
Enter
Enter
Enter
Enter
Enter
Enter
>
Enter
Enter
Enter
>
Schedule Settings
1 Schedule1 Enable Enter
2 Schedule2 Disable Enter
3 Schedule3 Disable Enter
4 Schedule4 Disable Enter
5 Schedule5 Disable Enter
6 Schedule6 Disable Enter
7 Schedule7 Disable Enter
8 Schedule8 Disable Enter
Return
menu: exit
enter: select
shuttle: value
/: item
Schedule Settings
1 Date Everyday
2 Start Time 12:00AM
3 End Time 12:00AM+
4 Start Record
5 Alarm Settings Disable Enter
6 Record Settings Disable Enter
7 Motion Settings Disable Enter
Return
menu: exit
enter: select
shuttle: value
//cam1~7: item
Configuration Menus
Yes
59