Updating The Edvr Client Software Installation - American Dynamics EDVR Installation And Operation Manual

EDVR Installation and Operation Guide
6. During the installation of the EDVR Client, you will see a window with a progress bar.
7. When the installation is successful, you will see the following window. Click the Close button to complete the
installation process.
8. After completing installation, you can start the EDVR Client in one of two ways:

Double-click the desktop icon (shown in the following figure), or
Open the Start menu on your computer and select Programs  American Dynamics EDVR to open

the program selection menu. Click the EDVR Client program link to start the program.
Note
Verify that the TCP/IP communication software has been properly configured on your computer.

Updating the EDVR Client Software Installation

It is not necessary to remove the current installation of the EDVR Client software (that is, an earlier version)
before you install a later version. When you install a later version of the EDVR Client software, the earlier version
will be automatically removed prior to the installation of the later version.
However, if you attempt to install the same version as the currently installed version, you will be prompted by the
installation program to either remove or repair the installed version.
80 EDVR