American Dynamics EDVR Installation And Operation Manual page 61

Motion Settings
Select to set the motion detection area of each channel.
Advanced Settings
1 Alarm Settings
2 Record Settings
3 Motion Settings
4 Camera Covert
5 Operation Locks
6 Communication
7 Disk Setup
8 Schedule
9 Dome Settings
Return
menu: exit
enter: select
/: item
1. Sensitivity
Control the sensitivity of the motion detection function. Use the shuttle ring to move the sensitivity bar to high (+)
or low (-).
2. Target Zone
You need to set up individual channel's target zone if motion detection is desired only in part of the viewing area,
represented by the 20Wx11H (220) points on the lower right quadrant of the screen. During (and after) the point
selection process, the effective points are marked "o" and the ineffective points "x". First use the shuttle to select
Manual or Auto setting mode. Then push the Enter button to begin the point marking session. Notice all points will
be marked "x" at the start.
MANUAL: The user can use the manual way to set the target area. Use the CALL button + , , , or 
button to mark the starting point A, and the SEQ. (Sequence) button + , , , or  button to mark the
ending point B.
AUTO: The user must move in front of the cameras, so that the EDVR can detect the motion and fix that
area as the motion area automatically. The area will be the target zone.
Once you are satisfied with the zone selection, push the Enter button again to leave the session.
3. Detect Track
Use the shuttle to choose the Off, Up, Down, Left, or Right direction of the detection function.
4. Duration
Choose a particular duration period to set off an alarm. The range is from 0.0 to 5.0 seconds.
For example, if you choose 0.0 second, and the EDVR will begin detecting immediately once the motion is
started. If you choose 5.0 seconds, then the EDVR will start detecting when the motion is continued for 5
seconds.
Enter
Enter
Enter
Select
Enter
Channel
Enter
>
Enter
Enter
Enter
Enter
CAM1 Motion Setting
○ – --------◘---------⊕
1 Sensitivity
2 Target Zone Manual
3 Track Detect Off
4 Duration 0.0 Sec
5 Size 1H1W
Return
menu: exit
shuttle: value
jog/cam1~5: item
enter: en/disable
call + ▲ / ▼ / /  :
set A dot
seq. + ▲ / ▼/  /  :
set B dot
x: area disable
o: area enable
Configuration Menus
51