Record Settings - American Dynamics EDVR Installation And Operation Manual

EDVR Installation and Operation Guide

Record Settings

This page enables you to set the recording rate and recording quality, and enables you to set the audio sampling
rate and the channel mode.
Advanced Settings
1 Alarm Settings
2 Record Settings
3 Motion Settings
4 Camera Covert
5 Operation Locks
6 Communication
7 Disk Setup
8 Schedule
9 Dome Settings
Return
menu: exit
enter: select
/: item
1. Record Quality
You can enter and set each channel's record quality at 4 different levels of recording images from Best, High,
Standard, and Basic.
2. Normal Record Rate
The rate range is 1 to 60 F/S for NTSC and 1 to 50 F/S for PAL (F/S is fields per sec, same as images
per sec or IPS as images are not interlaced).
3. Audio Sample Rate
This item has four options: 44K Hz, 22K Hz, 8K Hz, and Disable.
4. Audio Channel Mode
The options here are Stereo (two channels with the same input), and Left Input and Right Input (two channels
which work separately).
Return
Go back to the previous page.
50
Enter
Enter
Enter
Enter
Enter
>
Enter
Enter
Enter
Enter
Record Settings
1 Record Quality
2 Normal Record Rate
3 Audio Sampling Rate
4 Audio Channel Mode
Return
menu: exit
enter: select
shuttle: value
 / : item
Enter
30 F/S
44K Hz
Stereo
EDVR