American Dynamics EDVR Installation And Operation Manual page 14

EDVR Installation and Operation Guide
10. Zoom button
(Magnifying glass with "+" sign icon). Press to double the size of an image. To shift your zoom focus, use the
Left and Right, and Up and Down buttons ("", and "", "", and "", respectively). Press the Zoom button
again to return to the original image size.
11. ENTER button
Press to enter a selected item and save any new settings in the menu setup mode.
12. FREEZE button
Press to freeze an image in the live mode or play recorded video mode.
Note: During the play mode, pressing either the FREEZE or the PAUSE button has a different effect: press
the FREEZE button to capture a particular image while the image record continues running. Press the
PAUSE button to halt both the particular image and the image recording process. (See also PAUSE button
description.)
13. SEARCH button
Press to search recorded video. Pressing the SEARCH button displays the Search menu on the main
monitor. Select your search criteria from this menu.
14. DISPLAY button
Press to display the status of a hard disk(s) or the SD card (if an SD card is inserted).
15.  PLAY button
Press to play back a recorded video from a hard disk.
16.  STOP button
Press to stop playing back a recorded video from a hard disk.
II
17. PAUSE button

During recorded video: Press to stop the motion on the display. While the motion has been paused,
press the PAUSE button again to display one frame of a picture at a time in the forward direction.
Additionally, if you press ENTER during the paused video, you can access the SD Card Menu so that
you can save the image(s). (See also FREEZE button description.)

During live video: Press the PAUSE button to halt both the selected image and the image recording
process. (See also FREEZE button description.)
18.  REC button
Push to start recording video onto a hard disk while in the live display mode. Press again for at least 3
seconds to stop the recording. An amber indicator shows that recording is turned on.
19. Up button ("")
While in the setup menu mode, press to highlight the desired item.
In the live and play modes, press the Left ("") button to enter a single channel, with an inset of the next
channel with passes through three modes with successive button pushes.
20. Down button ("")
While in the setup menu mode, press to highlight the desired item.
In the live and play modes, you can press this button three times successively to get three multi-channel
modes on the main monitor, the first two times in a 3-way view, and the last in a 4-way mode.
21. Left button ("")
While in the setup menu mode, press to highlight the desired item.
In the live and play modes, press the Left button to enter a single channel, with an inset of the next channel
which passes through three modes with successive button pushes.
4 EDVR