American Dynamics EDVR Installation And Operation Manual page 100

EDVR Installation and Operation Guide
Change Pan / Tilt / Zoom Settings
There are two methods of accessing the PTZ Controls.

On the EDVR Client main window pane (see figure, pane label 1, page 81), click the PTZ Control tab.
(Note: The other tab is labeled Devices and shows you a list of the available EDVRs on the network.)

Click the
button, page 81).
Control
/
/
/
90
button on the home page to open the Speed Dome Controller (see figure, PTZ Control
Click to control the Zoom setting on the Speed Dome Controller.
Click to control the Aperture setting on the PTZ device control panel.
The right-hand set has four direction buttons. When you click a button, the
camera will be turned all the way, without stopping, in one of the four
designated directions.
Click to control the Focus setting on the PTZ device control panel.
Select a Speed Dome device ID from the drop-down list on the Speed
Dome Controller. The Controller will display the corresponding ID.
Description
EDVR