American Dynamics EDVR Installation And Operation Manual page 66

EDVR Installation and Operation Guide
3. Net Settings
This option is used to configure the Ethernet communication settings. These settings are required when
connecting the EDVR to a network (net).
Note: You may need to consult a qualified MIS professional to configure this setting.
Communication
1 RS-232 Setting
2 RS-485 Settings
3 Net Settings
Return
menu: exit
enter: select
▲ / ▼: item
1. DHCP
Set On to enable, or Off to disable the DHCP communication function. If provided with access to a DHCP server,
the EDVR can obtain an IP address automatically when the DHCP value is set to On.
2. IP Address
When the Net Settings menu item 1 DHCP is set to Off, the IP address may be manually edited.
3. Subnet Mask
When the Net Settings menu item 1 DHCP is set to Off, the IP mask may be manually edited.
4. Gateway
When the Net Settings menu item 1 DHCP is set to Off, the gateway may be manually edited.
5. DNS Address
The DNS IP address may be manually edited.
6. HTTP Port
The HTTP PORT allows users to set the HTTP port number from 1 to 65535.
Notes

Items 2-5 are used to configure the Ethernet communication settings. Configuring these settings is
required to make a network connection. Consult a qualified MIS professional to configure them.

When only one EDVR is connected to a computer or LAN, you can freely assign an IP address to the
EDVR. For example, there is a range of EDVR IP addresses from 192.168.1.1 to 192.168.1.255, and
you can pick any one for your use. It is not necessary to set the Mask and Gateway values. You can
leave the settings with the default values.
56
Enter
Enter
Enter
>
Net Settings
1 DHCP
2 IP Address
3 Subnet Mask
4 Gateway
5 DNS Address
6 HTTP Port
7 Device Name
8 Live Resolution
9 User Settings
10 DDNS Settings
Return
menu: exit
shuttle: value
 /  / jog: move
▲ / ▼: item
Off
192.168.001.001
255.255.255.000
192.168.001.254
168.095.001.001
00080
EDVR
CIF
Enter
Enter
EDVR