The Image Viewer - American Dynamics EDVR Installation And Operation Manual

EDVR Installation and Operation Guide
Play Monitor

Use the controls on the following panel to play, pause, stop, fast rewind, or fast forward, respectively.

To begin a backup, click the Start backup button. Click the Stop backup button when you are finished.

The Image Viewer

To start the Image Viewer:
From your Windows PC, go to the Start menu, and select Programs  American Dynamics EDVR  EDVR
Image Viewer. Refer to the following sample screen.
The EDVR is equipped with a digital "watermark," a feature that protects archived images and informs you
whether the images have been modified. This is image integrity-protection software. It not only allows you to view
an archived image from the SD card or hard disk driver (HDD) of a computer, but also protects an archived image
from reproduction or interpolation (editing). If an image is not in the original format form supplied by the EDVR,
the Image Viewer will not display the image and instead will display the warning message "Not Correct Image".
Closing this message enables you to view the image.
Complete the following instructions to open an archived image from an SD card or from hard disk drive (HDD).
1. Click the RELOAD button to load the images from a path.
2. Click the PRINT button to get a displayed image printed out from a printer.
94 EDVR