American Dynamics EDVR Installation And Operation Manual page 67


When an EDVR is connected to a WAN, you must acquire a unique, permanent IP address and
correctly configure the Mask and Gateway values according to your network architecture. If you have
any questions regarding those settings, contact a qualified MIS professional or your ISP.

When connecting to a network, each connected EDVR must be assigned a unique IP that must be in
the same class type as your network address. IP addresses are written as four sets of numbers
separated by periods; for example, 192.168.1.1 Therefore, if the connected network is identified as
Class C, for example, the first three sets of numbers of the EDVR IP address must be the same as
the network address. If the connected network is identified as Class B, the first two sets of numbers
of the EDVR IP address must be the same as the network address. If you have any questions
regarding these settings, contact a qualified MIS professional or your ISP.
7. Device Name
The default device name is EDVR.
8. Live Resolution
When accessing the EDVR using a Web browser, such as Microsoft Internet Explorer on your PC, this setting
allows you to select one of 3 modes for live images from your PC monitor:
Half D1: The maximum video capture resolution is 720 x 240 pixels (NTSC) or 720 x 288 pixels (PAL).
CIF: The maximum video capture resolution of NTSC is 352 x 240 pixels, and the resolution of PAL is
352 x 288 pixels.
QCIF: Quarter CIF. The maximum video capture resolution of NTSC is 160 x 120 pixels, and the resolution
of PAL is 160 x 144 pixels.
9. User Settings
When accessing the EDVR using a Web browser such as Microsoft Internet Explorer, users have to login by
entering a user (viewer) name and password. A user who accesses the EDVR with the admin name and
password has complete privileges to change all settings of the EDVR (please refer to section 7. for more details).
However, a user who accesses with just the viewer name and password has only the limited power to view.
Admin Name: The default admin name is ADMIN.
Admin Password: The default admin password is 9999.
Viewer Name: The default viewer (user) name is VIEWER.
Viewer Password: The default viewer (user) name is 0000.
Note
When accessing the EDVR using a Web browser such as Microsoft Internet Explorer, users have to log in by
entering the user name and password. The user who accesses with the admin name and password has the
full power to even change the settings of the EDVR. However, a user who accesses the EDVR with a viewer
name and password has only the limited power to view. Refer to the section "Using a Web Browser", page 95,
for more details.
10. DDNS Settings
DDNS (Dynamic Domain Name System) is a function that is provided by an American company. Refer to
www.dyndns.com for further information.
DDNS Mode: Activate On or Off. This option enables or disables the DDNS function.
Host Name: The default host name is EDVR.DYNDNS.ORG
User Name: The default user name is guest.
Password: The default password is 0000.
Return
Go back to the previous page.
Configuration Menus
57