Disk Setup - American Dynamics EDVR Installation And Operation Manual

EDVR Installation and Operation Guide

Disk Setup

Enter the Disk Setup menu to configure the following settings.
Advanced Settings
1 Alarm Settings
2 Record Settings
3 Motion Settings
4 Camera Covert
5 Operation Locks
6 Communication
7 Disk Setup
8 Schedule
9 Dome Settings
Return
menu: exit
enter: select
/: item
1. Disk Full
Determines the way the EDVR utilizes its storage media (hard disks) in case of a full disk.
Rewrite: When the hard disk is full, the device continues recording by displacing the old data (rewriting the
oldest data first).
Stop: When the hard disk is full, the device will stop recording.
2. Days to Keep Data in HDD
Select either Days (any number between 07 and 99 DAYS) or No Erase.
3. HDD1 Reformat
Allows you to clear out all the data in HDD1. You will be required to enter the pre-set password before proceeding
with clearing out the data. Enter the default password of 9999.
4. HDD2 Reformat
Allows you to clear out all the data in HDD2. You will be required to enter the pre-set password before proceeding
with clearing out the data. Enter the default password of 9999.
5. CD Reformat
Allows you to erase your CD disk if it is rewritable.
6. SD Card Reformat
Allows you to erase your SD card. You will be required to verify your selection before proceeding. Select and
enter the SD Card Format menu to erase all data on the SD card (Yes) or alternatively, not erase all data (No).
Return
Go back to the previous page.
58
Enter
Enter
Enter
Enter
Enter
Enter
Enter
Enter
>
Enter
Disk Setup
1 Disk Full
2 Days To Keep Data On HDD
3 HDD1 Reformat
4 HDD2 Reformat
5 CD Reformat
6 SD Card Reformat
Return
HD1 Model: ST320014A
HD2 Model:
CD Model: ASUS CRW-5232AX 1.0
menu: exit
shuttle: value
▲ / ▼/cam1~6: item
Rewrite
No Erase
Enter
Enter
Enter
Enter
EDVR