Rack Mount Kit
Required Items
In addition to the EDVR and the components provided with it, you also need to provide the following:
A composite monitor (NTSC or PAL, as appropriate for your system)
Cameras and BNC Cables
You may also want to include optional items such as a Call Monitor and the American Dynamics Touch Tracker
(ADTT16E) to expand your system.
Connecting Devices to the Rear Panel
Note
After you make all of the other connections, you will be instructed to connect the power cord.
1.
Remove all items from the shipping carton. If any item is missing or broken, please inform your American
Dynamics Account Manager immediately.
2.
Save all cartons and packing materials that came with the EDVR. Use these materials for shipping or
transporting the EDVR.
3.
Connect the main monitor to the Main Monitor BNC connector.
4.
Connect one or more cameras to the Camera In BNC connector(s). Depending on the version of the EDVR,
you can connect from 1 to 16 cameras (16CH version: 16 cameras; 9CH: 9 cameras; 4CH: 4 cameras).
Note
For loop through, Touch Tracker (ADTT16E), and other devices and connections, refer to the documentation
that is provided with that device. In addition, refer to the appendix, "Connecting a Touch Tracker ADTT16E",
page 106.
Installation
13