American Dynamics EDVR Installation And Operation Manual page 95

3. Click Advanced Settings to enter four pages: the Image, Alarm, Record, and User pages.

Image
Click Image to enter the Image page to set each channel's Channel Title, Quality, Noise Filter,
Brightness, Contrast, Color, and Hue. Click Submit to save your changes.

Alarm
The upper part of the window enables you to set the Duration, Disk Full, PreAlarm, and Frame Rate of
the alarm for the device. The bottom part of the window helps you set each channel's settings in the
event of an alarm. Set the Select Channel, Record Mode, Quality, Sensor Type, Sensor Sensitivity,
Sensor Output, Video Loss Output, and Motion Output for each channel. Click Submit to save your
changes.

Record
Click Record to enter the Record Settings page. In the upper part of the window you can set the
device's Disk Full, Frame Rate, Audio Rate, and Audio Channel entries. In the lower part of the window
set each channel's Select Channel and Quality values. Click Submit to save your changes.

User
Click User to enter the User Settings page and set the device's User Name, Password, New Password,
and Confirm. Click Submit to save your changes.
Note
This device also provides remote control and viewing capabilities via a Web browser, such as Microsoft
Internet Explorer. Refer to the section, "Using a Web Browser," page 95, for more details.
Operation
Remote Control
1.
After starting the EDVR Client, click the
select an EDVR and then click the
button. The software will automatically search the whole
local LAN for all EDVR devices to display a list of EDVRs.
Note: If you want to create a new EDVR connection via
the Internet, press the
see page 81).
Enter the EDVRs Host Name or IP address and its Port,
then press OK to add the EDVR connection.
(The default port is 80.)
2. Double-click the selected EDVR to access that EDVR's
login.
Enter the Username and Password -- the default
administrative username and password are admin and
9999.
3. The default multi-screen is the mode that you see now (depending on EDVR model: 4CH, 9CH, or 16CH).
4. The EDVR Client allows you to view almost any display mode that you want.
button to
Available Devices
button (near top right of item 2;
EDVR Client Software
85