EDVR Installation and Operation Guide
6.
TCP/IP Configuration setting
Click Start Control Panel Network Connections Local Area Connection.
Select Internet Protocol (TCP/IP) and then click Properties.
Notes
Before completing the EDVR installation in a WAN, verify that your Internet connection works properly. If
not, contact your network system administrator or Internet Service Provider (ISP).
If you are using a DHCP server, select Obtain an IP address automatically and click OK. Any
assigned IP address for the connected EDVRs must be in the same class type as the server. If there is
no DHCP server available, select Use the following IP address and type in the IP address of your PC,
and click OK. This IP address must be different from the EDVR IP but in the same class type.
Note
The IP address of an EDVR in a network must be unique; that is, different from those of the other PCs, but
in the same class type.
76
EDVR