Appendix D: Connecting A Touch Tracker Adtt16E - American Dynamics EDVR Installation And Operation Manual

EDVR Installation and Operation Guide

Appendix D: Connecting a Touch Tracker ADTT16E

To connect an American Dynamics Touch Tracker ADTT16E advanced dome controller to your EDVR, refer to
the installation and setup guides that are included with the ADTT16E. In addition, refer to the following diagram.
Note
For the EDVR Communications Settings, the RS-232 Baud rate value must be 9600.
COLOR
Orange
Yellow
Orange
Yellow
106
PIN FUNCTION
1 Host A
Host B
2
Auxiliary A
Auxiliary B
4
COLOR PIN
Orange
White
Red
Black
Yellow
COLOR PIN
GREEN 5
RED
ORANGE 2
To Dome
Refer to instructions
included with device.
FUNCTION
1 SensorNet A
2 28 Vac
3 Ground
4 28 Vac
5 SensorNet B
to DB9M RS-232 connector
on back of EDVR
EDVR