American Dynamics EDVR Installation And Operation Manual page 108

EDVR Installation and Operation Guide
Advanced Settings: Image
Click to enter the Image Settings page to set each channel's Channel Title, Quality, Noise Filter, Brightness,
Contrast, Color, and Hue. Click Submit to save any setting change(s).
Advanced Settings: Alarm
The upper part of the window enables you to set the Duration, Disk Full, PreAlarm, and Frame Rate of the alarm
for the device.
The lower part of the window helps you set each channel's settings in the event of an alarm. Set Select Channel,
Record Mode, Quality, Sensor Type, Sensor Sensitivity, Sensor Output, Video Loss Output, and Motion Output
for each channel. Click Submit to set your changes.
Click Alarm Output Setting to enter the Alarm Output Setting page and set the detail items of alarm output.
Click Submit to save any settings change(s).
98 EDVR