Programmable Settings; Video Format; Video Level; Alarm - American Dynamics Intellex Intellex DVMS Installation And Configuration Manual

Before Installing the Intellex

Programmable Settings

Setting
Camera names
Camera termination
Security access
Administrator PIN
Schedule mode
Record settings
Alarm duration
Alarm record settings
Alarm on video loss
Alarm display message
Latch message
Alarm input names
Alarm input polarity
Live sequencer dwell
Live display format
Playback overlay

Video Format

Color (input and output)
B&W (input and output)

Video Level

Camera inputs
Camera outputs
Analog output

Alarm

Alarm inputs
Alarm outputs
Alarm duration
4
Camera1–Camera16
75 Ω
Disabled
1234
Regular
Circular Mode, normal sensitivity, 60 ips (50 ips PAL)
5 seconds
30 ips (25 ips PAL), normal quality, normal sensitivity
Enabled
Enabled
Disabled
AlarmIn1–AlarmIn16
Active Low
2 seconds
1×1
Enabled, Upper-Right
NTSC or PAL
EIA or CCIR
1.0 V p-p, 75 Ω
1.0 V p-p, 75 Ω
1.0 V p-p, 75 Ω
4, 8, or 16 inputs. Activated by contact closure or TTL/CMOS signal.
Programmable polarity.
4, 8, or 16 outputs. TTL/CMOS compatible active high. Driven to +4V and
can drive 6mA. Initialized to inactive low on power-up.
Programmable from 5 seconds – 5 minutes.
Default Value
Intellex®