Password Settings; Save Sd Card Settings; Load Sd Card Settings - American Dynamics EDVR Installation And Operation Manual

3. Save SD Card Settings

If you wish to quickly set up many EDVR units with the same settings, you can save all of the settings from this
EDVR to an SD card (and then insert the SD Card in the other machines; see next item).

4. Load SD Card Settings

This item allows you to load your entire settings to another EDVR from an SD Card (see previous item).
5. Load Factory Settings
This page enables you to reload the factory default settings.
6. Version Information
Selecting this item displays the EDVR model number, the system software (firmware) version number, and the
system software release date.
Return
Go back to the previous page.

Password Settings

This page enables you to set the password.
Main Menu
1 Quick Settings
2 Display Options
3 Sequence Settings
4 Picture Adjust
5 Operation Log
6 Advanced Settings
7 Default Settings
8 Password Settings
9 Exit Menu
enter: select
/: item
Call + ◄/►English Francais Espanol
Italiano Deutsch
1. Menu Password
If you choose to password-protect the Main Menu to block any unauthorized entry, select this menu item.
Enter New Menu Password:
Type in a 4-digit password of your choice.
Re-Enter Menu Password:
Retype your advanced password in order to verify that it was entered correctly.
After you set this password: The next time you enter the Main Menu you will be prompted to enter this password:
Password: _ _ _ _
Type in the correct password to enter the Main Menu.
Password Settings
1 Menu Password
2 Advanced Settings Password
3 Default Settings Password
4 Reformat Password
Return
>
menu: exit
enter: select
 / : item
Configuration Menus
Enter
Enter
Enter
Enter
69