Installation And Use Of Intellex Accessories - American Dynamics Intellex Intellex LT Reference And Troubleshooting Manual

INSTALLATION AND USE OF INTELLEX ACCESSORIES

Intellex USB Floppy Drive-RDVFLP01
The Intellex USB floppy drive can be used to save Intellex configurations, single .bmp
images from the image tools feature, and to install software patches and upgrades.
If the USB Floppy drivers are already installed in Intellex
DV8000 and DV16000 units with product codes D80024x-xxx and D60024x-xxx as well
as some earlier DV8000 and DV16000 systems already have the USB floppy drivers
installed.
Installation
Insert the USB cable of the floppy drive into one of the USB connectors in the rear of
the Intellex. It is not necessary to exit Intellex.
Intellex USB CD-RW Drive-RDVCDRX01
The Intellex USB CD-RW drive can be used to export video clips to CD-R or CD-RW
disks or to update the Intellex software.
NOTE: Do not disconnect the CD-RW while an export is in progress. The data will be
lost and the media will be ruined.
If the USB CD-RW drivers are already installed in Intellex
DV8000 and DV16000 units with product codes D80024x-xxx and D60024x-xxx
already have the USB CD-RW drivers installed.
Installation
The first time that the CD-RW is connected to the Intellex unit, you must exit the
Intellex application software and set the drive properties in Windows.
1. Exit Intellex by selecting Utility, Exit.
NOTE: Exiting to the system is a protected feature. You must possess the Exit to
System privilege to access it.
2. Connect the USB CD-RW to the Intellex unit by connecting the cable from the CD-
RW to the USB connector on the rear of the unit. Some messages may appear as the
device is recognized and added to the device list.
3. Go to Windows Control Panel by clicking on Start, Settings, Control Panel.
4. Double-click on the System icon. Then click on the Device Manager tab in the
System Properties window.
Quick Reference Guide
Intellex® LT Digital Video Management System
9