Web Configuration
Upgrading or Downgrading the Firmware
The Firmware on the IP Encoder can be upgraded or downgraded as required using a compatible
Firmware Update Package (FUP) provided by American Dynamics.
Procedure 3-14 details the steps required to change the firmware of the IP Encoder.
Procedure 3-14 Updating / Downgrading the Firmware
1 Ensure that the browser is displaying the Main Configuration page (if not refer to Procedure 3-
3).
2 Select the Update Firmware button.
The Firmware Update page is displayed, as shown in Figure 3-18.
3 Enter the name of the FUP (including network path) to be used, or select Browse and use the
file browser to locate and select the FUP.
4 Select Update Firmware.
The Firmware Update Process page is displayed, as shown in Figure 3-19.
3-24
Figure 3-18 Firmware Upgrade page
Installation and User Guide